• A colorful box with the words TapeBlock Creative Circuit Making for All. There is a set of hands holding a power and Light TapeBlock. In the bottom left are five different TapeBlocks including Red Power, Yellow Button, Green Light, Greeen vibration and Green fan.
  • Picture of a jumble or components including 2 Red foam blocks, 3 green foam blocks, a USB cable with alligator clips, LEDs, motors, conductive tape
  • Three sheets of 1 mm foam: red, green and yellow
  • A 30 meter roll of conductive tape
  • Usb plug cable and black and red alligator clips
  • A translucent plastic box which has a label TapeBlock Creative Circuit Kit. It has LED in multiple compartments
  • A bright light in the middle of a red and yellow printed flower. This is being held by a hand over 2 silver lines of tape on a green foam block
  • Close up of fingers holding a black and red button between two pieces of silver tape which are around a yellow foam block
  • A close up of a button cell vibration motor with Two rows of sliver tape around a green foam block
1 12

TapeBlock

1 TapeBlock Workshop Kit (As seen at SXSW)

1 TapeBlock Workshop Kit (As seen at SXSW)

$99.00
$99.00
Sale Sold out

The TapeBlock Workshop Kit includes a range of foam blocks, conductive tape and materials so you can make all of your favourite TapeBlocks. The kit includes: a power cable, a range of LEDs such as bi-color, flashing and flickering to experiment with. This is in addition to switches, vibration and a motor to try. The kit also includes materials to make your own TapeBlock Character including 1mm EVA foam sheet. Batteries are not included.

Blocks

  • 2x Red Blocks
  • 1x Yellow Blocks
  • 4x Green Blocks
  • 1x Blue block with a hole for a motor
  • 1x Shaped Block

Components

  • 20x meters of conductive tape
  • 1x USB Buck Converter
  • 5x Sheets 1mm EVA foam

Component Box

  • 20x Bicolour LED (R/B)
  • 20x Bicolour LED (Y/G)
  • 20x RGB Slow colour change
  • 20x RGB Fast colour change
  • 10x Flashing Red/blue LED
  • 10x Yellow candle LED
  • 1x Motor
  • 1x Snowflake blade
  • 1x 3D printed flower
  • 1x Vibration motor
  • 1x Tilt switch
  • 1x Button (2 pins)

For the vibration motor, motor and switches a spare is included.

 

View full details